Products - Bosch Addressable Fire Alarm System (UL) https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul.html vi Mon, 18 Mar 2019 09:03:31 GMT Mon, 18 Mar 2019 09:03:31 GMT https://anphat.com/en/rss.html https://anphat.com/uploads/logo_7ecc26aa0884bc403d6dd32336df07cd.png Products - Bosch Addressable Fire Alarm System (UL) https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul.html 144 25 Analog Sensor Base https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/analog-sensor-base.html Mon, 18 Mar 2019 09:03:31 GMT The FAA‑325‑B4 Analog Detector Base is combined with analog addressable detectors that use an advanced digital communication protocol to provide early fire warning for life safety and property protection.]]> Analog Addressable Fire Panels https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/analog-addressable-fire-panels.html Mon, 18 Mar 2019 09:03:09 GMT The FPA‐1000 Analog Addressable Fire Panels are a scalable solution for fire detection. The standard control panel includes one SLC that supports 254 addressable points (254 analog detectors or modules, or 127 analog sounder bases in combination with a suitable detector). The control panel is easily expandable with the FPE‐1000‐SLC Signaling Line Circuit Plug-in Module, doubling the address points to 508.]]> Remote Command Center https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/remote-command-center.html Mon, 18 Mar 2019 09:03:24 GMT The FMR‐1000‐RCMD Remote Command Center is a four-conductor LCD annunciator with system control capability for use with FCP‐1000 Analog Addressable Fire Panels.
It shows the equivalent LEDs and LCD display and includes a piezo sounder, navigation buttons, and operation keys for drill, reset, silence, and acknowledge.

 ]]>
Remote Annunciator https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/remote-annunciator.html Mon, 18 Mar 2019 09:03:27 GMT The FMR‐1000‐RA Remote Annunciator is a four‐conductor LCD annunciator without system control capability. It shows the equivalent LEDs and LCD display. It includes a piezo sounder, navigation buttons, and acknowledge key. The navigation functions and the acknowledge key are accessible without restriction.
 ]]>
Signaling Line Circuit Plug‐in Module https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/signaling-line-circuit-plug-in-module.html Mon, 18 Mar 2019 09:03:25 GMT The FPE‐1000‐SLC Signaling Line Circuit Plug‐in Module provides a Signaling Line Circuit (SLC) for connection of analog devices to the FPA‐1000 Analog Addressable Fire Panels.
For addressing a detector/ sounder base combination, addresses 1 through 127 are available for the detector and 128 through 254 for the sounder base.

 ]]>
Networking Card 3-Ethernet https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/networking-card-3-ethernet.html Mon, 18 Mar 2019 09:03:00 GMT The FPE‑1000‑NE Ethernet Networking Card provides two Ethernet ports for in/out peer‑to‑peer communication and one additional Ethernet port for communication with the fiber optic and wired cards, for IP reporting, or for browser-based panel/network programming.]]> Networking Card 1‐Ethernet 2‐Fiber Optic https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/networking-card-1-ethernet-2-fiber-optic.html Mon, 18 Mar 2019 09:03:31 GMT The FPE‐1000‐NF Fiber Optic Networking Card provides two fiber optic ports for in/out peer‐to‐peer communication and one additional Ethernet port for communication with the Ethernet and wired cards, for IP reporting, or for browser-based panel/network programming.
 ]]>
Networking Card 1‐Ethernet 2‐Wired https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/networking-card-1-ethernet-2-wired.html Mon, 18 Mar 2019 09:03:41 GMT The FPE‐1000‐NW Wired Networking Card provides two wired ports for in/out peer‐to‐peer communication and one additional Ethernet port for communication with the fiber optic and Ethernet cards, for IP reporting, or for browser-based panel/network programming.]]> Analog Sounder Base https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/analog-sounder-base.html Mon, 18 Mar 2019 09:03:57 GMT he FAA‐325‐B6S Analog Sounder Base contains an addressable sounder which provides an audible alarm in the immediate vicinity. The sounder base only works in combination with one of the analog detectors (FAH‐325, FAI‐325, or FAP‐325 family) and is auxiliary powered.]]> Conventional Zone Module https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/conventional-zone-module.html Mon, 18 Mar 2019 09:03:20 GMT The FLM‐325‐CZM4 Conventional Zone Module enables the FPA‐1000 Analog Addressable Fire Panels to interface and monitor up to 25 conventional devices depending on the device type such as two-wire smoke detectors or pull stations.]]> Supervised Output Module with isolator https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/supervised-output-module-with-isolator.html Mon, 18 Mar 2019 09:03:18 GMT The modules provide a supervised polarity reversal output used for audible and visual signaling devices or to trigger a remote NAC power expander. They require a 24 VDC auxiliary input voltage that can be provided by the FPA‐1000 Analog Addressable Fire Panels or other UL listed power supplies. The modules provide a Class B Circuit rated for 2 A at 24 VDC. They fit into a standard 4‐inch square or double‐gang electrical back box.]]> Supervised Output Modules https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/supervised-output-modules.html Mon, 18 Mar 2019 08:03:40 GMT The modules provide a supervised polarity reversal output used for audible and visual signaling devices or to trigger a remote NAC power expander. They require a 24 VDC auxiliary input voltage that can be provided by the FPA‐1000 Analog Addressable Fire Panels or other UL listed power supplies. The modules provide a Class B Circuit rated for 2 A at 24 VDC. They fit into a standard 4‐inch square or double‐gang electrical back box.]]> Short Circuit Isolator https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/short-circuit-isolator.html Mon, 18 Mar 2019 08:03:39 GMT The FLM‐325‐ISO Short Circuit Isolator isolates a shorted section on a specific polling circuit from the rest of the system to minimize the loss of devices. It fits into a standard 4-inch square or double‐gang electrical back box.]]> Dual Relay Module with Isolator https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/dual-relay-module-with-isolator.html Fri, 15 Feb 2019 08:02:57 GMT Provides 8 A current with built-in short circuit isolator circuitry at two independently-controlled Form C contacts for a variety of Normally Open and Normally Closed applications such as fan, elevator and door control, or auxiliary notification. As the modules use mechanically latching relays, a separate 24 VDC power supply is not required. They fit into a standard 4‐inch square or double‐gang electrical back box]]> Dual Relay Module https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/dual-relay-module.html Fri, 15 Feb 2019 07:02:22 GMT Provides 8 A current at two independently-controlled Form C contacts for a variety of Normally Open and Normally Closed applications such as fan, elevator and door control, or auxiliary notification. As the modules use mechanically latching relays, a separate 24 VDC power supply is not required. They fit into a standard 4‐inch square or double‐gang electrical back box]]> Contact Monitor https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/contact-monitor-9.html Fri, 15 Feb 2019 07:02:13 GMT FLM-325-I4-AI Contact Monitor 4-inch Class A with Isolator is used to connect standard Normally Open or Normally Closed dry contact types of fire alarm devices such as pull stations or water flow devices]]> Contact Monitor https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/contact-monitor.html Fri, 15 Feb 2019 07:02:22 GMT The FLM-325-I4-A modules is used to connect standard Normally Open or Normally Closed dry contact types of fire alarm devices such as pull stations or water flow devices]]> Analog Standard Base https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/analog-standard-base-7.html Fri, 15 Feb 2019 07:02:21 GMT FAA-440-B4 Analog Isolator Base come in two size 4 in. (10 cm) which has a built‐in isolator. They are used in combination with FAP-440 and FAH-440 analog addressable detectors to provide early fire warning for life safety and property protection]]> Analog Isolator Base https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/analog-isolator-base-6.html Fri, 15 Feb 2019 07:02:52 GMT FAA-440-B4-ISO Analog Isolator Base come in two size 4 in. (10 cm) which has a built‐in isolator. They are used in combination with FAP-440 and FAH-440 analog addressable detectors to provide early fire warning for life safety and property protection]]> Analog Standard Base https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/analog-standard-base.html Fri, 15 Feb 2019 07:02:25 GMT FAA-440-B6 Analog Isolator Base come in two size 6 in. (16 cm). They are used in combination with FAP-440 and FAH-440 analog addressable detectors to provide early fire warning for life safety and property protection]]> Analog Isolator Base https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/analog-isolator-base.html Fri, 15 Feb 2019 07:02:32 GMT FAA-440-B6-ISO Analog Isolator Base come in two size 6 in. (16 cm) which has a built‐in isolator. They are used in combination with FAP-440 and FAH-440 analog addressable detectors to provide early fire warning for life safety and property protection]]> Analog Manual Stations https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/analog-manual-stations.html Fri, 15 Feb 2019 06:02:16 GMT These manual stations are used in the polling circuit of the Bosch Security Systems, Inc.'s FPA‐1000 Analog Addressable Fire Panels, and the D9024, D8024, and D10024A Fire Alarm Control Panels (FACP).
All commercial buildings use manual stations. These manual stations allow people evacuating a building to initiate an alarm. The FACP identifies the alarm point on the polling circuit and the alarm lever latches in the pulled position.
]]>
Analog Device Programmer https://anphat.com/en/products/bosch-addressable-fire-alarm-system-ul/analog-device-programmer.html Fri, 15 Feb 2019 03:02:00 GMT The D5070 Analog Device Programmer is a hand-held device used to program address settings on EEPROM-programmable analog devices. The programmer consists of a base for detector head programming and three programming adapters for programming other modules and devices]]>